Accessories

Miscellaneous Accessories

6 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. PSU-EUR-01

    PSU-EUR-01

    £10.00

    • Plugs directly into the power socket of K3 range
    • Input +230V DC
    • Output +9V DC 300mA

    Learn More

  2. PSU-UK-01

    PSU-UK-01

    £10.00

    • Plugs directly into the power socket of K3 range
    • Input +230V DC
    • Output +9V DC 300mA

    Learn More

  3. CAB-030

    CAB-030

    2-wire RS485 adaptor cable which interfaces K2-ADE, K3-ADE or USB-485 to Emerson / Control Techniques drives.

    • Connects directly into the drive's RJ45 connector
    • Also works with the KD485-ADE DIN rail converter, with a wiring adaptation

    Learn More

  4. CAB-003-XLR

    CAB-003-XLR

    This cable converts the DB9 RS485 connector of the K2-ADE, K3-ADE or USB-485 into a 3-pin male XLR 2-wire RS485 connector, as widely used with professional broadcast equipment controlled via 2-wire RS485.

    Learn More

  5. USB-485 AND XLR BUNDLE

    USB-485 AND XLR BUNDLE

    This combination of a USB485 converter and XLR cable is ideal for use with many professional audio controllers. The converter will plug directly into the USB socket of a laptop PC while the three pin XLR plug connects to the remote interface port of the controller allowing remote control using appropriate software.

    XTA recommends this combination for use with their iCore software and DP series audio management controllers.

    The USB485 is an isolated USB to RS422 or RS485 converter. It is ideal for laptops which do not have a physical serial port and cannot be used with a conventional interface converter. The USB port also provides sufficient power for a full-spec RS422 or RS485 interface capable of driving termination resistors and long cables.

    The XLR cable converts the DB9 RS485 connector of the USB485 into a 3-pin male XLR 2-wire RS485 connector, as widely used with professional broadcast equipment controlled via 2-wire RS485.

    Learn More

  6. USB-485 TO EMERSON BUNDLE

    USB-485 TO EMERSON BUNDLE

    This combination of the USB-485 converter and the CAB-030 cable is intended for directly connecting into the RJ45 port of Emerson / Control Techniques SK, SP, Quantum, Mentor and EP motor drives. It has been tested at up to 38400 baud with the Commander SK and the supplied CTSoft drive control software.

    Learn More

6 Item(s)

per page

List  Grid 

Set Ascending Direction