Interface Converters

Items 11 to 17 of 17 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. KD485-ADE-232-20MA

    KD485-ADE-232-20MA

    The KD485-ADE-232-20MA is similar to the KD485-STD-232-20MA but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. The KD485-ADE is intended for RS232 to 20mA loop (TTY), half duplex and full duplex.

    Port 1 is RS232. Port 2 is 20mA loop (TTY).

    Learn More

  2. KD485-PROG-232-20MA

    KD485-PROG-232-20MA

    This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.

    Port 1 is RS232. Port 2 is 20mA loop (TTY).

    Learn More

  3. KD485-STD-422-20MA

    KD485-STD-422-20MA

    The KD485-STD-422-20MA is an interface converter/isolator only and is baud rate and character format independent. Its main application is in isolated conversion between RS422 and 20mA loop (TTY). It requires a power supply in the range of 7-35 volts at typically less than 2 watts. If the built-in 20mA current source is to be utilised, the power supply should be 24V.

    Port 1 is RS422. Port 2 is 20mA loop (TTY).

    Learn More

  4. KD485-ADE-422-20MA

    KD485-ADE-422-20MA

    The KD485-ADE-4XX-20MA is similar to the KD485-STD-422-20MA but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. The RS422 or RS485 interface can operate as RS422 or 2-wire or 4-wire RS485.

    Port 1 is RS422/485. Port 2 is 20mA loop (TTY).

    Learn More

  5. KD485-PROG-422-20MA

    KD485-PROG-422-20MA

    This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.

    Port 1 is RS422 or RS485. Port 2 is 20mA loop (TTY).

    Learn More

  6. KD485 C Compiler

    KD485 C Compiler

    £450.00

    PC-based ANSI C cross-compiler for KD485-PROG, H8/300 CPU. Single user license, no runtime royalties.

    Learn More

  7. KD485 MODBUS RTU Library

    KD485 MODBUS RTU Library

    £300.00

    MODBUS RTU SLAVE library for KD485-PROG. Speeds up building Modbus-custom protocol converters. No runtime royalty.

    Learn More

Items 11 to 17 of 17 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction