Details
RS485 adaptor cable which interfaces K2-ADE, K3-ADE or USB-485 to Emerson / Control Techniques drives. It connects directly into the drive's RJ45 connector. It also works with the KD485-ADE DIN rail converter, with a wiring adaptation.
These drives use 2-wire RS485, on an RJ45 connector. The RJ45 connections are published in the drive manuals and the CAB-030 converter cable provides the DB9-RJ45 conversion:
CAB-030 is 0.5m in length. It has been tested at up to 38400 baud with the Commander SK and the supplied CTSoft drive control software. The Unidrive SP, Mentor and other products use the same interface. The K2-ADE and K3-ADE are configured for 2-wire RS485, transmitter and receiver both auto-controlled, and usually for 19200 baud which is the default baud rate for most CT drives. For the USB-485, CAB-030 contains the correct wire links to configure 2-wire RS485.
The 3-way isolated DIN rail mounted KD485-ADE can also be used in more "industrial" applications, with Port 2 wired for 2-wire RS485, with the following connections:
The KD485-ADE is normally configured for 19200 baud, 8 bits/word, no parity, 2 stop bits, Mode 1.
Some Control Techniques drives can be configured for up to 115200 baud which is supported by the USB-485 and the KD485-ADE. The K2-ADE Option 01 also offers 115200 baud (not tested with the above drives). The most notable aspect of the comms is two stop bits.
Additional Information
| Downloads: | No |
|---|---|
| Price | £5.00 |
Check items to add to the cart or select all
You have no items to compare.
You have no items in your shopping cart.