Non-isolated
A range of low-cost non-isolated RS232 to RS422/RS485 interface converters.
-
K2
£39.00 As low as: £37.05The K2 is a non-isolated RS232 to RS422 or RS485 converter for 0-115200 baud.
- Primarily for RS232 to RS422 conversion
- For RS485, RTS Control is required from the RS232 device
- DB9 female connector at both ends
- Plugs directly into a standard PC DB9 RS232 port
-
K2-TB
£40.50 As low as: £38.55The K2 is a non-isolated RS232 to RS422 or RS485 converter for 0-115200 baud.
- Primarily for RS232 to RS422 conversion
- For RS485, RTS Control is required from the RS232 device
- DB9 female connector on RS232, removable terminal block on RS422
- Plugs directly into a standard PC DB9 RS232 port
-
K2-ADE
£59.00 As low as: £56.05The K2-ADE is a non-isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver control
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K2)
- Option 01 for 115200 baud
- DB9 Female connector at both ends
- Plugs directly into a standard PC DB9 RS232 port
-
K2-ADE-TB
£60.50 As low as: £57.47The K2-ADE-TB is a non-isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver control
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K2-TB)
- Option for 115200 baud
- DB9 female connector on RS232, removable terminal block on RS485
- Plugs directly into a standard PC DB9 RS232 port