DIN Rail Converters
The KK Systems range of DIN rail isolated converters comprises of
- The KD485-STD range - interface converters only, no processor or data buffering
- The KD485-ADE range - interface converters with a processor, data buffering and predefined function
- The KD485-PROG range - as KD485-ADE but can run application specific data/protocol converter programs (written in C)
- The KDE485 range - a C user programmable converter with four serial ports, Ethernet, and USB
The isolation of the KD485/KDE485 is tested at 1500V AC for 1 second. The power input is isolated from the rest of the unit. This is unique and enables e.g. a single power supply to power any number of units without compromising isolation or creating ground loops.
-
KD485-ADE
£149.00 As low as: £141.55The KD485-ADE is similar to the KD485-STD but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. The KD485-ADE is a highly versatile converter which is intended for RS232 to RS485 conversion but works equally well for RS232 to RS422, half duplex and full duplex.
Port 1 is RS232. Port 2 is RS422 or RS485.
-
KD485-ADE-232-232
£169.00 As low as: £141.55The KD485-ADE-232-232 is similar to the KD485-STD-232-232 but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion.
Port 1 is RS232. Port 2 is RS232.
-
KD485-ADE-4XX-4XX
£169.00 As low as: £141.55The KD485-ADE-4XX-4XX is similar to the KD485-STD-422-422 but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. It can also be used for connecting 2-wire RS485 slaves to a 4-wire RS485 bus, or vice versa. Subject to minimum intermessage gaps it can also operate as a 2-wire RS485 repeater.
Port 1 is RS422 or RS485. Port 2 is RS422 or RS485.
-
KD485-ADE-232-20MA
£169.00 As low as: £141.55The KD485-ADE-232-20MA is similar to the KD485-STD-232-20MA but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. The KD485-ADE is intended for RS232 to 20mA loop (TTY), half duplex and full duplex.
Port 1 is RS232. Port 2 is 20mA loop (TTY).
-
KD485-ADE-422-20MA
£169.00 As low as: £141.55The KD485-ADE-4XX-20MA is similar to the KD485-STD-422-20MA but inserts a microprocessor (with two serial ports) into the data path which provides data buffering and facilitates baud rate etc conversion. The RS422 or RS485 interface can operate as RS422 or 2-wire or 4-wire RS485.
Port 1 is RS422/485. Port 2 is 20mA loop (TTY).
-
KD485-PROG
£195.00 As low as: £185.25This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.
Port 1 is RS232. Port 2 is RS422 or RS485.
-
KD485-PROG-232-232
£215.00 As low as: £185.25This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.
Port 1 is RS232. Port 2 is RS232.
-
KD485-PROG-4XX-4XX
£215.00 As low as: £185.25This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.
Port 1 is RS422 or RS485. Port 2 is RS422 or RS485.
-
KD485-PROG-232-20MA
£215.00 As low as: £185.25This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.
Port 1 is RS232. Port 2 is 20mA loop (TTY).
-
KD485-PROG-422-20MA
£215.00 As low as: £185.25This interface converter is similar to the KD485-ADE with the addition of a 32kbyte EEPROM into which application specific data conversion programs can be loaded. It is typically used for protocol conversion applications. A MODBUS RTU SLAVE library is available to speed up the development of custom Modbus RTU converters.
Port 1 is RS422 or RS485. Port 2 is 20mA loop (TTY).