Isolated

The K422-ISOL is an isolated RS232 to RS422 converter for 0-38400 baud.

The RS232 port is DB25 female. The RS422 port is DB25 male.

Learn More

The K232-ISOL is a RS232-RS232 isolator for 0-38400 baud.

The "local" RS232 port is DB25 female. The "remote" RS232 port is DB25 male.

Learn More

The K485-ISOL is an isolated RS232 to 2-wire RS485 converter for 0-38400 baud.

The RS232 port is DB25 female. The RS485 port is DB25 male.

Learn More

The K3-232-TB is a RS232 to RS232 isolator.

• Intended for full-duplex point to point communication
• 0-38400 baud
• DB9 connector on "local" (PC) RS232 port and a terminal block on "remote" RS232 port
• Plugs directly into a standard PC DB9 RS232 port

Learn More

The K3-232 is a RS232 to RS232 isolator.

• Intended for full-duplex point to point communication
• 0-38400 baud
• DB9 connector on both RS232 ports
• Plugs directly into a standard PC DB9 RS232 port

Learn More

The K3-ADE-TB is an isolated RS232 to RS485 converter for 1200-38400 baud.

• Intended for RS232 to 2-wire RS485 conversion
• Microprocessor-controlled automatic RS485 driver
• RTS Control not needed
• Not recommended for RS232 to RS422 (use K3-TB)
• DB9 female connector on RS232, removable terminal block on RS485
• Plugs directly into a standard PC DB9 RS232 port

Learn More

The K3-ADE is an isolated RS232 to RS485 converter for 1200-38400 baud.

• Intended for RS232 to 2-wire RS485 conversion
• Microprocessor-controlled automatic RS485 driver control
• RTS Control not needed
• Not recommended for RS232 to RS422 (use K3)
• DB9 female connector at both ends
• Plugs directly into a standard PC DB9 RS232 port

Learn More

The K3-TB is an isolated RS232 to RS422 or RS485 converter for 0-38400 baud.

• Primarily for RS232 to RS422 conversion
• For RS485, RTS Control is required from the RS232 device
• DB9 female connector on RS232, removable terminal block on RS422
• Plugs directly into a standard PC DB9 RS232 port

Learn More