Inline Converters
The KK Systems range of inline products comprises of
- The K2 range - non isolated, DB9 to DB9/terminal block
- The K3 range - isolated, DB9 to DB9/terminal block
- The K422-ISOL and K232-ISOL - isolated, older products, DB25 to DB25
The isolated products are tested with a 1000V AC test voltage for 1 second.
-
K422-ISOL
£69.00 As low as: £65.55The K422-ISOL is an isolated RS232 to RS422 converter for 0-38400 baud.
The RS232 port is DB25 female. The RS422 port is DB25 male.
-
K232-ISOL
£69.00 As low as: £65.55The K232-ISOL is a RS232-RS232 isolator for 0-38400 baud.
The "local" RS232 port is DB25 female. The "remote" RS232 port is DB25 male.
-
K3-232-TB
£70.50 As low as: £66.97The K3-232-TB is a RS232 to RS232 isolator.
- Intended for full-duplex point to point communication
- 0-38400 baud
- DB9 connector on "local" (PC) RS232 port and a terminal block on "remote" RS232 port
- Plugs directly into a standard PC DB9 RS232 port
-
K3-232
£69.00 As low as: £65.55The K3-232 is a RS232 to RS232 isolator.
- Intended for full-duplex point to point communication
- 0-38400 baud
- DB9 connector on both RS232 ports
- Plugs directly into a standard PC DB9 RS232 port
-
K3-ADE-TB
£90.50 As low as: £85.97The K3-ADE-TB is an isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K3-TB)
- DB9 female connector on RS232, removable terminal block on RS485
- Plugs directly into a standard PC DB9 RS232 port
-
K3-ADE
£89.00 As low as: £84.55The K3-ADE is an isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver control
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K3)
- DB9 female connector at both ends
- Plugs directly into a standard PC DB9 RS232 port
-
K3-TB
£70.50 As low as: £66.97The K3-TB is an isolated RS232 to RS422 or RS485 converter for 0-38400 baud.
- Primarily for RS232 to RS422 conversion
- For RS485, RTS Control is required from the RS232 device
- DB9 female connector on RS232, removable terminal block on RS422
- Plugs directly into a standard PC DB9 RS232 port
-
K3
£69.00 As low as: £65.55The K3 is an isolated RS232 to RS422 or RS485 converter for 0-38400 baud.
- Primarily for RS232 to RS422 conversion
- For RS485, RTS Control is required from the RS232 device
- DB9 female connector at both ends
- Plugs directly into a standard PC DB9 RS232 port
-
K2-ADE-TB
£60.50 As low as: £57.47The K2-ADE-TB is a non-isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver control
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K2-TB)
- Option for 115200 baud
- DB9 female connector on RS232, removable terminal block on RS485
- Plugs directly into a standard PC DB9 RS232 port
-
K2-ADE
£59.00 As low as: £56.05The K2-ADE is a non-isolated RS232 to RS485 converter for 1200-38400 baud.
- Intended for RS232 to 2-wire RS485 conversion
- Microprocessor-controlled automatic RS485 driver control
- RTS Control not needed
- Not recommended for RS232 to RS422 (use K2)
- Option 01 for 115200 baud
- DB9 Female connector at both ends
- Plugs directly into a standard PC DB9 RS232 port