Details
The KD485-STD-232-20MA is an interface converter/isolator only and is baud rate and character format independent. Its main application is in isolated conversion between RS232 and 20mA loop (TTY). It requires a power supply in the range of 7-35 volts at typically less than 2 watts. If the built-in 20mA current source is to be utilised, the power supply should be 24V.
Port 1 is RS232. Port 2 is 20mA loop (TTY).
- Two serial ports (port type must be specified when ordering)
- DIN-rail enclosure with removable screw terminals; fits 35mm symmetric rails
- 29mm width on DIN rail
- 7-35V DC powered
- Three-way isolated (Port 1, Port 2 and power input are mutually isolated)
- Data flow indicator LEDs
- 0-38400 baud, low-emission drivers
- High quality removable screw terminals
Additional Information
Downloads: | |
---|---|
Price | £109.00 |