USB Converters

USB to serial (RS232, RS422, RS485) interface converters

5 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. USB-485

    USB-485

    The USB-485 is an isolated USB to RS422 or RS485 converter. It is ideal for computers which do not have a physical serial port and cannot be used with a conventional interface converter. The USB port also provides sufficient power for a full-spec RS422 or RS485 interface capable of driving termination resistors and long cables.

    Drivers are included (on an 80mm CD) to create a virtual COM port in the operating system. The optional CAB-003-XLR cable converts the DB9 connector to the standard 3-pin male XLR used in professional broadcast applications.

    The USB-485 is unique in the market in that it has a world-unique device ID which ensures that it appears under the same COM port number regardless of which USB port on a particular PC it is plugged into. This simplifies application software configuration and eliminates many tech support issues.

    Learn More

  2. USB-232

    USB-232

    The USB-232 is an isolated USB to RS232 converter.

    This product is ideal for computers which do not have a serial port, or where an extra serial port is required.

    The USB-232 is unique in the market in that it has a world-unique device ID which ensures that it appears under the same COM port number regardless of which USB port on a particular PC it is plugged into. This simplifies application software configuration and eliminates many tech support issues.

    Learn More

  3. USB-485 AND XLR BUNDLE

    USB-485 AND XLR BUNDLE

    This combination of a USB485 converter and XLR cable is ideal for use with many professional audio controllers. The converter will plug directly into the USB socket of a laptop PC while the three pin XLR plug connects to the remote interface port of the controller allowing remote control using appropriate software.

    XTA recommends this combination for use with their iCore software and DP series audio management controllers.

    The USB485 is an isolated USB to RS422 or RS485 converter. It is ideal for laptops which do not have a physical serial port and cannot be used with a conventional interface converter. The USB port also provides sufficient power for a full-spec RS422 or RS485 interface capable of driving termination resistors and long cables.

    The XLR cable converts the DB9 RS485 connector of the USB485 into a 3-pin male XLR 2-wire RS485 connector, as widely used with professional broadcast equipment controlled via 2-wire RS485.

    Learn More

  4. USB-485 TO EMERSON BUNDLE

    USB-485 TO EMERSON BUNDLE

    This combination of the USB-485 converter and the CAB-030 cable is intended for directly connecting into the RJ45 port of Emerson / Control Techniques SK, SP, Quantum, Mentor and EP motor drives. It has been tested at up to 38400 baud with the Commander SK and the supplied CTSoft drive control software.

    Learn More

  5. USB-485 TO EPSON IDN BUNDLE

    USB-485 TO EPSON IDN BUNDLE

    This combination of the USB-485 converter and the CAB-032 cable is intended for interfacing between the USB port of a Windows based POS terminal and an Epson IDN printer.

    Learn More

5 Item(s)

per page

List  Grid 

Set Ascending Direction