DIN Rail Converters
The KK Systems range of DIN rail isolated converters comprises of
- The KD485-STD range - interface converters only, no processor or data buffering
- The KD485-ADE range - interface converters with a processor, data buffering and predefined function
- The KD485-PROG range - as KD485-ADE but can run application specific data/protocol converter programs (written in C)
- The KDE485 range - a C user programmable converter with four serial ports, Ethernet, and USB
The isolation of the KD485/KDE485 is tested at 1500V AC for 1 second. The power input is isolated from the rest of the unit. This is unique and enables e.g. a single power supply to power any number of units without compromising isolation or creating ground loops.
-
KDE485
£129.00 As low as: £122.55The KDE485 is a C user-programmable protocol converter with many features aimed at modern factory automation and other professional and industrial applications.
It offers 2xRS232 RS422 2wRS485 serial ports and extensive connectivity features via Ethernet (TCP/IP), USB (VCP/CDC, MSC), optional ARINC429, and an optional isolated 16-bit sensor interface supporting PT100, PT1000, thermocouple and other sensors.
Custom software development is supported via a powerful license-free STM Cube IDE development environment which is preconfigured to minimise the learning curve.
-
KDE485 ISOLATED ANALOG
£159.00 As low as: £151.05The KDE485 is a C user-programmable protocol converter with many features aimed at modern factory automation and other professional and industrial applications.
It offers 2xRS232 RS422 2wRS485 serial ports and extensive connectivity features via Ethernet (TCP/IP), USB (VCP/CDC, MSC), optional ARINC429, and an isolated 16-bit sensor interface supporting PT100, PT1000, thermocouple and other sensors.
Custom software development is supported via a powerful license-free STM Cube IDE development environment which is preconfigured to minimise the learning curve.
-
KDE485 GPS-NTP
£253.00 As low as: £240.35KDE485 GPS-NTP is a version of the KDE485 which is preconfigured to act as a GPS to NTP time server.
This provides a time source for a LAN which does not have internet access for security reasons. -
KDE485 OPTION GPS
£124.00 As low as: £117.80KDE485 OPTION GPS is a GPS receiver PCB which fits internally into the KDE485.
This option involves a mounting kit and is normally factory installed. -
KDE485 OPTION 22 BIT ADC
£69.00 As low as: £65.55KDE485 OPTION 22 BIT ADC is a PCB which fits internally into the KDE485.
This option involves a mounting kit and is normally factory installed. -
KD485-STD
£89.00 As low as: £84.55The KD485-STD is an interface converter/isolator only and is baud rate and character format independent. Its main application is in isolated conversion between RS232 and RS422. It can also drive a 2-wire RS485 bus if the RS232 host provides RTS Control. Requires a power supply in the range of 7-35 volts at typically less than 2 watts.
Port 1 is RS232. Port 2 is RS422 or RS485.
-
KD485-STD-232-232
£109.00 As low as: £84.55The KD485-STD-232-232 is an interface converter/isolator only and is baud rate and character format independent. Its main application is isolation between RS232 and RS232. It requires a power supply in the range of 7-35 volts at typically less than 2 watts.
Port 1 is RS232. Port 2 is RS232.
-
KD485-STD-422-422
£109.00 As low as: £84.55The KD485-STD-422-422 is an interface converter/isolator only and is baud rate and character format independent. Its main application is isolation between RS422 and RS422. It requires a power supply in the range of 7-35 volts at typically less than 2 watts. The KD485-STD-422-422 does not support RS485 because its interface drivers are permanently enabled, but can be used for RS485 monitoring.
Port 1 is RS422. Port 2 is RS422.
-
KD485-STD-232-20MA
£109.00 As low as: £84.55The KD485-STD-232-20MA is an interface converter/isolator only and is baud rate and character format independent. Its main application is in isolated conversion between RS232 and 20mA loop (TTY). It requires a power supply in the range of 7-35 volts at typically less than 2 watts. If the built-in 20mA current source is to be utilised, the power supply should be 24V.
Port 1 is RS232. Port 2 is 20mA loop (TTY).
-
KD485-STD-422-20MA
£109.00 As low as: £84.55The KD485-STD-422-20MA is an interface converter/isolator only and is baud rate and character format independent. Its main application is in isolated conversion between RS422 and 20mA loop (TTY). It requires a power supply in the range of 7-35 volts at typically less than 2 watts. If the built-in 20mA current source is to be utilised, the power supply should be 24V.
Port 1 is RS422. Port 2 is 20mA loop (TTY).