KD485-STD-422-422

Availability: In stock

£109.00
  • Buy 5 for £89.00 each
  • Buy 25 for £84.55 each
OR

Quick Overview

The KD485-STD-422-422 is an interface converter/isolator only and is baud rate and character format independent. Its main application is isolation between RS422 and RS422. It requires a power supply in the range of 7-35 volts at typically less than 2 watts. The KD485-STD-422-422 does not support RS485 because its interface drivers are permanently enabled, but can be used for RS485 monitoring.


Port 1 is RS422. Port 2 is RS422.

KD485-STD-422-422

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The KD485-STD-422-422 is an interface converter/isolator only and is baud rate and character format independent. Its main application is isolation between RS422 and RS422. It requires a power supply in the range of 7-35 volts at typically less than 2 watts. The KD485-STD-422-422 does not support RS485 because its interface drivers are permanently enabled, but can be used for RS485 monitoring. It can also act as a Master on a 4-wire "RS485" bus.

Port 1 is RS422. Port 2 is RS422.

  • Two serial ports (port type must be specified when ordering)
  • DIN-rail enclosure with removable screw terminals; fits 35mm symmetric rails
  • 29mm width on DIN rail
  • 7-35V DC powered
  • Three-way isolated (Port 1, Port 2 and power input are mutually isolated)
  • Data flow indicator LEDs
  • 0-115200 baud, low-emission drivers
  • High quality removable screw terminals

Additional Information

Downloads:

Product Datasheet

User Manual

Price £109.00