Details
The KD485-STD-422-422 is an interface converter/isolator only and is baud rate and character format independent. Its main application is isolation between RS422 and RS422. It requires a power supply in the range of 7-35 volts at typically less than 2 watts. The KD485-STD-422-422 does not support RS485 because its interface drivers are permanently enabled, but can be used for RS485 monitoring. It can also act as a Master on a 4-wire "RS485" bus.
Port 1 is RS422. Port 2 is RS422.
- Two serial ports (port type must be specified when ordering)
- DIN-rail enclosure with removable screw terminals; fits 35mm symmetric rails
- 29mm width on DIN rail
- 7-35V DC powered
- Three-way isolated (Port 1, Port 2 and power input are mutually isolated)
- Data flow indicator LEDs
- 0-115200 baud, low-emission drivers
- High quality removable screw terminals
Additional Information
Downloads: | |
---|---|
Price | £109.00 |